Students can rely on these Class 9 Science Notes and Exploration Chapter 7 Work Energy and Simple Machines Notes for complete exam preparation.
Class 9 Science Chapter 7 Work Energy and Simple Machines Notes
Class 9 Science Chapter 7 Notes – Class 9 Work Energy and Simple Machines
→ Work (W = F × S): Done when force displaces object in direction of force. Unit = joule (J). Can be +ve, -ve, or zero.
→ Work-Energy Theorem : W = ∆ E. Work done = change in energy. SI unit of energy = joule (J).
→ Kinetic Energy : K = 1/2 mv2 Due to motion. If v doubles → KE × 4. Always positive.
→ Potential Energy : U = mgh. Due to position/deformation. Gravitational PE stored when raised to height h.
→ Conservation of Mechanical energy:KE + PE = constant (no friction). PE converts to KE in free fall. ME = mgh throughout.
→ Power (P = W/T): Rate of doing work. SI unit = watt (W). I W = 1 J/s. I hp = 746 W. MA = LOAD/EFFORT
→ Pulley: MA = 1 (fixed). Inclined plane: MA = L/h. Lever: MA effort arm /load arm.
→ 3 Lever Classes
Class I: fulcrum between (scissors).
Class II: load between (wheelbarrow).
Class III: effort between (tweezers).
→ Work is done by force acting on an object when force displaces the object in direction of force. W = F × s where sis displacement in the direction of force.
→ Work energy theorem states that work done by force on an object is equal to change in its energy. Work done on an object = change in its energy
→ Energy is the capacity to do work.
→ Mechanical energy is the energy that an object possesses due to its motion or position.
→ Kinetic energy is the energy possessed by an object due to its motion.
→ Kinetic energy of an object of mass m moving with velocity u is K = \(\frac{1}{2}\) mv2
→ Potential energy is the energy possessed by an object due to its position or configuration, e.g. stretched rubber band, extension or compress a spring.
![]()
→ Gravitational potential energy of body of mass m at height h above the surface of earth is U = mgh
→ Mechanical energy is the sum of kinetic energy and potential energy. E = K+U
→ Principle of conservation of total mechanical energy states that total mechanical energy of a system is conserved If no other external forces act on it. K + U = constant
→ Power is defined as rate at which work is done.
Power = \( \frac{\text { Work }}{\text { Time }}=\frac{W}{t}\)
→ Simple machines are devices that make work easy by changing the magnitude or direction of applied force.
→ Simple machines are pulley, inclined plane, and lever.
→ Force applied to machine is called effort, and force that needs to overcome is called load.
→ Mechanical advantage of machine = \(\frac{\text { Load }}{\text { Effort }} \)
Class 9 Science Exploration Chapter 7 Notes
→ Work
Work is done by force acting on an object when force displaces the object in direction of force.
W = F × s, where s is displacement in the direction of force SI unit of work is joule (J)
1 Joule of work is done on an object when constant force of 1 Newton = ( 1 kg m/s2) displaces the object by 1 m in direction of force.
W = 1 N × 1 m = 1 kg m/s2 × 1m = 1 kg m2/s2 =J
Work done can be calculated from the area under the force-displacement graph between initial and final positions.
In the graph below, force on an object is plotted on the y-axis against the displacement in the direction of force on the x-axis. What is the work done on the object?
Answer:
Work done = area of rectangle = 10 × 1 = 10 J

→ When is work done equal to Zero?
Work done on an object is zero if force applied is zero or there is no displacement of object, e.g., if force is applied on rigid wall, there is no displacement of wall and no work is done on the wall.
→ When is work done Negative or Positive?
Work done by the force on an object is positive when displacement is in the same direction of the force .g. When a person pushes the chair, force applied on the chair and its displacement is in same direction. Thus work done by the person on chair is positive.
![]()
Work done by the force on an object is negative when displacement is in the opposite direction of the force e.g.
When a person stops the moving ball, force applied is in direction opposite to the direction of motion of ball or its displacement. Thus work done by person on the ball is negative.
Work done by friction is negative as force of friction opposes displacement.
When a body is moved on rough surface, work done by the applied force is positive, but work done by friction force is negative.
Question 1.
A boy lifts a dumbbell and lowers it down. When the boy does positive work and negative? on the dumbbell.
Answer:
Boy applies force = Weight of dumbbell to lift it upwards.
When it is lifted upward, force applied is in the direction of displacement. Thus work done is positive. When it is lowered downward, force applied to hold it is in the opposite direction of displacement. Thus work done is negative.
Question 2.
A goalkeeper moved his hand back by 15 cm as he stopped a ball while applying a force of 200 N. What is the work done by this force on the ball in stopping it?
Answer:
When a goalkeeper stops the moving ball, force applied is in direction opposite to the direction of motion of ball. Thus work done by person on the ball is negative. Displacement is taken negative because ball moves in a direction opposite to the direction of force.
W = 200 N × (-0.15) = – 30 J.
→ The Work – Energy Theorem
The work-energy theorem states that work done by force on an object is equal to change in its energy.
Work done on an object = change in its energy
Energy is the capacity to do work. SI unit of energy is joule (J)
Question 1.
In carrom, player struck the shot with striker to pocket the black coin. Identify who does work and changes in energy that occurs at each collision.
Answer:
The moving striker hits the white coin which then hits the black coin. The moving striker applies force in direction of displacement of the white coin. Thus striker does positive work on white coin and increases its energy. By Newton’s third law, white coin applies opposite force on striker and does negative work on the striker and decreases its energy. Similarly white coin does positive work on black coin and increases its energy, while black: A carrom shot coin does negative work on the white coin and decreases its energy.

→ Forms Of Energy
Energy is the capacity to work to do. Energy exists in many forms and can be converted from one form to another.
→ Mechanical Energy
Mechanical energy is the energy that an object possesses due to its motion or position.
→ Kinetic Energy
- Kinetic energy is the energy possessed by an object due to its motion.
- Kinetic energy of an object of mass m moving with velocity u is K = \(\frac{1}{2}\) mv2
- SI unit of kinetic energy is joule (J).
- If positive work is done on an object and its velocity increases, then its kinetic energy increases.
- If negative work is done on an object and its velocity decreases, then its kinetic energy decreases.
- If no work is done on an object and its velocity does not change, then its kinetic energy remains constant.

Question 1.
If velocity of vehicle doubles in magnitude, what will be its finial kinetic energy be compared to its initial kinetic energy?
Answer:
Initial kinetic energy of the bullet is K =\(\frac{1}{2}\) mv2
Final kinetic energy \(\frac{1}{2}\) m(2v)2 = 4 × \(\frac{1}{2}\) mv2 = 4 K [FinalK = 4K].
![]()
Question 2.
A cricketer bowled a cricket ball of mass 0.2 kg with velocity of 20 mIs. What is the kinetic energy of ball at the time of its delivery?
Answer:
K = \(\frac{1}{2}\) mv2 Kinetic energy is K = \(\frac{1}{2}\) × 0.2 × (20)2 = 40 J
Question 3.
An aircraft of mass 1500 kg lands on the deck of an aircraft carrier. It stopped within 100 m on application of constant backward force of 367500 N with strong wire. What was the velocity of the aircraft just before application of backward force to stop it?
Answer:
Let the initial velocity = v and final velocity when it stops = 0
Initial kinetic energy of the aircraft is
K=\(\frac{1}{2}\) m(2v)2 =\(\frac{1}{2}\) × 15000 × v2
Final kinetic energy = 0
Change in kinetic energy = 0 – \(\frac{1}{2}\) × 15000 × v2
Work done on an object = change in its energy
Work done by the force is negative when displacement is in the opposite direction of the force.
W = F × s = 367500 × (-100)
367500 × (-100) = \(\frac{1}{2}\) × 15000 × v2 ; v = 70 m/s

→ Potential Energy
Potential energy is the energy possessed by an object due its position or configuration, e.g. stretched rubber band, extension or compress a spring.
Its SI unit is joule (J).
Relative position: Systems interacting through gravitational, electric, or magnetic forces store energy based on their configuration. E.g., two unline magnetic poles separated store energy: a ball lifted above the ground stores gravitational potential energy.
There are mainly two types of potential energy:
i. Gravitational potential energy
ii. Elastic potential energy of spring

Gravitational Potential Energy
Gravitational potential energy of body of mass m at height h above the surface of earth is U = mgh
Elastic Potential Energy
It is the energy associated with the extension or compression of spring.
U = \(\frac{1}{2}\) k x2 where k is spring constant and x is extension of spring.
An unstretched spring has zero potential energy.
Conservation of Mechanical Energy
Mechanical energy is the sum of kinetic energy and potential energy. E=K+U
Principle of conservation of total mechanical energy states that total mechanical energy of a system is conserved if no other external forces act on it. K + U = constant
Let us consider a ball at A, then B and C energy at three position remain same position at A.
At A
u = 0 or v = 0, s = h
So K.E = 0
P.E. = mgh
Total EA = mgh
At B
h = (h – x)
P.E. = mg(h-x), K.E. = \(\frac{1}{2}\) mv2
29s = v2 (s = x)
29 x = v2
Now, K.E. = mgx
So, Total Eb = mgx + mgh – mgx
EB = mgh
At C
h = 0, s = x
P.E. = 0 (v2 = 2gh)
K.E. = \(\frac{1}{2}\) m × 2gh
TEc = mgh
So, EA = EB = EC.
Energy can neither be created nor be destroyed.

Question 1.
A cricketer throws a ball of mass 200 g high up in the air to height of 10 m above the ground. How much potential energy does ball have when ball reaches its maximum height?
Answer:
Potential energy is U = mgh = 0.2 × 9.8 × 10 = 19.6 J.
![]()
Question 2.
What is the magnitude of velocity of child on reaching the bottom of slide of height h?
Answer:
Potential energy at height h = mgh
Kinetic energy at the bottom of slide = \(\frac{1}{2}\) mv2
Potential energy at height h, kinetic energy at the bottom of slide mgh = \(\frac{1}{2}\) mv2 ; v = \(\sqrt{2 g h} \)
→ Power
Power is defined as rate at which work is done
Power = \(\frac{\text { Work }}{\text { Time }}=\frac{W}{t} \)
SI unit of power is watt (W).
1 watt = I joule of work done per second = 1 JIs.
Horsepower (hp) is unit to measure power of car engines, motorbikes, and water pumps. 1 hp = 746 W
Question 1.
An elevator can carry a maximum load of 1800 kg and move up with a constant speed of 2 m/s. The frictional force opposing the motion is 4000 N. Determine the minimum power delivered by the motor to the elevator.
Answer:
Load = 1800 × 10 = 18000 N
Force of friction is f = 4000 N
Downward force on the elevator is F = mg + f (1800 × 10) + 4000 = 22000 N
Question 2.
An engine pumps 400 kg of water through height of 10 m above the ground in 40 s. How much electric power is consumed by the engine?
Answer:
P = \(\frac{W}{t} \) = W = mgh = 400 × 10 × 10 = 40000J
Power used by engine is P = 40000/40 = 1000 W
Question 3.
Ramesh lifts 75 kg of water by 2 m in 5 s. How much power is required for this task?
Answer;
P = \(\frac{W}{t} \) Work done is W = mgh = 75 × 10 × 2 = 1500 J
Power is P = 1500/5 = 300 W
Question 4.
Car of mass 1000 kg starts from rest and reaches a speed of 20 m/s in 10 s. How much power is required for this task?
Answer:
Work clone on an object = change in its energy
Initial kinetic energy = 0
Final kinetic energy = \(\frac{1}{2}\) mv2 = \(\frac{1}{2}\) × 1000 × (20)2
Work done = Change in kinetic energy = \(\frac{1}{2}\) × 1000 × (20)2 – 0 = 200000 J
P = \(\frac{W}{t} \) = 200000/10 = 20000 W
→ Simple Machines:
Simple machines are devices that make work easy by changing the magnitude or direction of applied force.
Simple machines are pulley, inclined plane, and lever.
Force applied to machine is called effort and force that needs to overcome is called load.
Mechanical advantage of machine = \(\frac{\text { Load }}{\text { Effort }}\)

Pulley:
Pulley is a wheel with groove that guides a rope.
A fixed pulley does not reduce the magnitude of force required. It only changes direction.
Mechanical advantage of pulley is 1 because effort and load are equal in magnitude. It does not reduce the magnitude of force required.
Inclined Plane
An inclined plane is simple machine that helps to move a load to higher or lower level. It helps to move a heavy loads to a higher level using a smaller force over a larger distance instead of lifting it vertically with a large force.
![]()
Question
A person uses an inclined ramp of length 50 cm to raise an object over a step 30 cm high. What is the mechanical advantage of the ramp?
Answer:
Mechanical advantage of inclined plane = \(\frac{\text { Load }}{\text { Effort }}=\frac{L}{h}\) = 50/30 = 1.67

Lever
Lever is rigid bar that can rotate about fixed point.
Components of Lever:
- Fulcrum: It is fixed point about which lever rotates.
- Load: is the force that needs to overcome.
- Effort: is the force applied.
- Load Arm: The perpendicular distance from the fulcrum to the point where the load is applied.
- Effort Arm: The perpendicular distance from the fulcrum to the point where the effort is applied.

The distance of load from the fulcrum is called Load arm, and distance of effort from fulcrum is called effort arm.
In a lever, Load × Load arm = Effort × Effort arm
Thus, mechamcal advantage of lever = \(\frac{\text { Load }}{\text { Effort }}=\frac{\text { effort arm }}{\text { load arm }}\)
Lever are of three types depending on the position of effort, fulcrum, and load:

Question.
For a seesaw with four seats A,B,D,E and fulcrum at C, AC = EC = 2 m and BC = DC = 1 m. On which seats children of mass 15 kg and 30 kg sit to balance the see saw?
Answer:
Let the child of mass 15 kg sit at seat A and child of mass: 1o kg sit at distance L from the fulcrum.
In a lever, Load × Load arm = Effort × Effort arm 15 × 2 = 30 × L; L = 1 m
Thus, child of mass 30 kg to sit at seat D
The SI unit of work and energy is the joule. named after James Prescott Joule. He showed that mechanical energy and heat are related and can be converted into each other, helping develop a unified concept of energy.
![]()
The unit of power, watt, is named in the honour of James Watt. He invented an efficient steam engine that could generate rational motion and move wheels.
