Start by reviewing these Exploration Class 9 Science Solutions Chapter 9 Atomic Foundations of Matter Question Answer NCERT Solutions to strengthen your knowledge.
Class 9 Science Exploration Chapter 9 Question Answer
Class 9 Science Ch 9 Atomic Foundations of Matter Question Answer
Atomic Foundations of Matter Class 9 Questions and Answers (Exercise)
Revise, Reflect, Refine
Question 1.
A particular element (A) has one electron in its third shell. There is another element (B) with six electrons in its second shell.
(i) How many electrons does A tend to give or take to become stable?
(ii) What kind of ion would it form?
(iii) How many electrons
(iii) How many electrons does B tend to give or take to become stable?
(iv) What kind of ion would it form?
(v) If A and B were to combine, what kind of bond would be formed?
(vi) What would be the formula for the compound thus formed?
Solution:
(i) Element A has 1 valence electron, so it tends to give electron to become stable.
(ii) It would form a positive ion called a cation (A+).
(iii) Element B has 6 valence electrons, so it tends to take electrons to complete its octet and become stable.
(iv) It would form a negative ion called an anion (B2-).
(v) Since A is a metal (gives electrons) and B is a non-metal (takes electrons), they would form an ionic bond.
(vi) To balance the charges, two atoms of A will combine with one atom of B, so the formula will be A2B.
Question 2.
An element X has six electrons in its outer shell and forms a diatomic molecule.
(i) Why would that be so?
(ii) What kind of bond would it form?
(iii) Draw the structure of the molecule it would form.
(iv) A certain other element T has two electrons in its second shell. Draw the structure of the molecule that X would form with Y.
Solution:
(i) Element X has 6 electrons in its outermost shell, meaning it is short of 2 electrons to complete its octet (a stable noble gas configuration). To achieve stability, two atoms of X will mutually share two of their valence electrons with each other, forming a stable diatomic molecule (X2).
(ii) Since it shares two pairs of electrons (a total of 4 electrons) between the two non-metal atoms, it forms a double covalent bond.
(iii) Formation of diatomic molecule X2 (double covalent bond) is as follows

(iv) Element Y has 2 valence electrons and tends to lose them, while X tends to gain 2. They form an ionic compound by transfer of electrons.

Question 3.
You want to design a new ionic compound where the total positive charge is 6+, and the total negative charge is 6–. Which of the following combinations gives the correct number of ions?
(i) 2 Al3+ and 3 Cl–
(ii) 3 Mg2+ and 1 \(P \mathrm{O}_4^{3-}\)
(iii) 2 F3+ and 3 O2-
(iv) 3 Ca2+ and 2 \(S \mathrm{O}_4^{2-}\)
Solution:
- The correct combination is (iii) 2 F3+ and 3 O2-. Positive charge 2 iron ions (Fe3+) provide a total charge of 2 × 3 = 6 +.
- Negative charge: 3 oxide ions (O2-) provide a total charge of 3 × 2 = 6 -.
- Since both the positive and negative charges equal 6, this combination satisfies the requirement.
![]()
Question 4.
Choose the correct statement(s) and correct the false statement(s).
(i) Elements are made up of molecules and compounds are made up of atoms.
(ii) The molecule of a compound is always made up of two or more atoms of the same kind.
(iii) One molecule of nitrogen gas contains three nitrogen atoms.
(iv) Water is made of two hydrogen atoms, covalently bonded with one oxygen atom.
Solution:
(i) False
Correction: Elements are made up of atoms (or molecules of the same atom), and compounds are made up of molecules.
(ii) False
Correction: The molecule of a compound is always made up of two or more atoms of different kinds.
(iii) False
Correction: One molecule of nitrogen gas (N2) contains two nitrogen atoms.
(iv) True
Water (H2O) consists of two hydrogen atoms covalently bonded to one oxygen atom.
Question 5.
Write the chemical formulae for the following compounds.
(i) Aluminium nitrate
(ii) Calcium oxide
(iii) Ferric oxide
Solution:
(i) Aluminium nitrate: The formula of aluminium nitrate:

Formula: Al(NO3)3
The aluminium ion (Al3+ ) has a valency of 3, while the nitrate ion (NO3) has a valency of 1. Thus, three nitrate ions are needed to balance the charge of one aluminium ion. Note the use of brackets around the polyatomic nitrate ion.
(ii) Calcium oxide: The formula of calcium oxide

Formula: CaO
Here, the valencies of the two elements are the same (2). Crossing them gives Ca2O2, which is simplified to the lowest common ratio and written simply as CaO.
(iii) Ferric oxide: The formula of ferric oxide

Formula: Fe2O3
Iron (Fe) can exhibit a valency of 2 or 3. The ‘ic’ suffix in the word ferric indicates that it uses the higher valency of 3. Crossing the valencies gives Fe2O3.
![]()
Question 6.
Write the formulae of the compounds formed from the following pairs of ions.
(i) Ca2+ and Br–
(ii) Al3+ and \(C \mathrm{O}_3^{2-}\)
(iii) K+ and \(S \mathrm{O}_4^{2-}\)
(iv) \(N \mathrm{H}_4^{+}\) and Cl–
Solution:
(i) Ca2+ and Br–: The formula of calcium bromide

Formula: CaBr2
The calcium ion (Ca2+) has a valency of 2, and the bromide ion (Br–) has a valency of 1. Two bromide ions balance one calcium ion.
(ii) Al3+ and \(C \mathrm{O}_3^{2-}\): The formula of alminium carbonate

Formula: Al2(CO3)3
The aluminium ion (Al3+) has a valency of 3, and the carbonate ion (\(C \mathrm{O}_3^{2-}\)) has a valency of 2. Brackets are required around the poly-atomic carbonate ion.
(iii) K+ and \(S \mathrm{O}_4^{2-}\): The formula of potassium sulphate

Formula: K2SO4
The potassium ion (K+) has a valency of 1, and the sulphate ion (\(S \mathrm{O}_4^{2-}\)) has a valency of 2. Two potassium ions balance one sulphate ion.
(iv) \(N \mathrm{H}_4^{+}\) and Cl–: The formula of ammonium chloride

Formula: NH4Cl
The ammonium ion (\(N \mathrm{H}_4^{+}\)) and the chloride ion (Cl–) both have a valency of 1, resulting in a simple 1 : 1 ratio.
![]()
Question 7.
Which of the following, in the given figure, correctly represents the Cl- ion (Atomic number of chlorine = 17)?

Solution:
The correct representation is (ii).
The atomic number of chlorine is 17, so its neutral atom has an electronic configuration of (2, 8, 7).
To form a Cl– ion, it gains one electron to complete its octet, making the configuration (2, 8, 8).
Diagram (ii) correctly shows 2 electrons in the first shell, 8 in the second, and 8 in the third shell.
Question 8.
Determine the formula unit mass of the following substances.
(i) Ammonium nitrate (NH4NO3), used as a nitrogen fertiliser, which is essential for plant growth.
(ii) Phosphoric acid (H3PO4), used to make phosphate fertiliser and detergents.
(iii) Sodium hydrogencarbonate(NaHCO3), used to relieve acidity and helps in digestion.
Solution:
(i) Formula unit mass of ammonium nitrate (NH4NO3)
Atomic mass:
N = 14 u;
H = 1 u;
O = 16 u
Formula unit mass of NH4NO3 = (14 u × 2) + (1 u × 4) + (16 u × 3) = 80 u.
(ii) Formula unit mass of phosphoric acid (H3PO4)
Atomic mass:
H = 1 u;
P = 31 u;
O = 16 u
Formula unit mass of H3PO4 = (1 u × 3) + (31 u × 1) + (16 u × 4) = 98 u.
(iii) Formula unit mass of sodium hydrogencarbonate (NaHCO3)
Atomic mass:
Na = 23 u;
H = 1 u;
C = 12 u;
0 = 16 u
Formula unit mass of NaHCO3 = (23 u × 1) + (1u × 1) + (12u × 1) + (16u × 3) = 84 u.
![]()
Question 9.
Write the formulae for the compounds formed by the reaction of
(i) Magnesium and nitrogen
(ii) Lithium and nitrogen
(iii) Sodium and sulphur
(iv) Aluminium and oxygen
Solution:
(i) Magnesium and nitrogen
The formula of magnesium nitride

Formula: Mg3N2
Magnesium (Mg) has a valency of 2, and nitrogen (N) has a valency of 3. Crossing their valencies gives the formula Mg3N2.
(ii) Lithium and nitrogen
The formula of lithium nitride

Formula: Li3N
Lithium (Li) has a valency of 1, and nitrogen (N) has a valency of 3. Three lithium atoms are needed to balance one nitrogen atom.
(iii) Sodium and sulphur
The formula of sodium sulphide

Formula: Na2S
Sodium (Na) has a valency of 1, and sulphur (S) has a valency of 2. Two sodium atoms balance one sulphur atom.
(iv) Aluminium and oxygen
The formula of aluminium oxide

Formula: Al2O3
Aluminium (Al) has a valency of 3, and oxygen (O) has a valency of 2. Crossing their valencies gives Al2O3.
Question 10.
Complete the table by writing the formulae of the compounds formed by the cations on the left and the anions at the top. LiNO3 is given as an example.

Solution:
The completed formulae for table are as follows.
| NO3– | SO42- | PO43- | |
| NH4+ | NH4NO3 | (NH4)2SO4 | (NH4)3PO4 |
| Li+ | LiNO3 | Li2SO4 | Li3PO4 |
| Al3+ | Al(NO3)3 | Al2(SO4)3 | AlPO4 |
| Cu2+ | Cu(NO3)2 | CuSO4 | Cu3(PO4)2 |
Question 11.
5.3 g of sodium carbonate and 6.0 g of acetic acid react to produce 2.2 g of carbon dioxide, 0.9 g of water, and 8.2 g of sodium acetate. Verify whether the law of conservation of mass is valid.
Solution:
According to the law of conservation of mass, the total mass of the reactants must be equal to the total mass of the products.
Total mass of reactants = Mass of sodium carbonate + Mass of acetic acid
Total mass of reactants = 5.3 g + 6.0 g = 11.3 g
Total mass of products = Mass of carbon dioxide + Mass of water + Mass of sodium acetate
Total mass of products = 2.2 g + 0.9 g + 8.2 g = 11.3 g
Since the total mass of the reactants (11.3 g) is equal to the total mass of the products (11.3 g), the law of conservation of mass is verified.
![]()
Question 12.
If a species has 11 protons, 12 neutrons, and 10 electrons, then
(i) what is its atomic number and mass number?
(ii) Is it neutral, a cation, or an anion? Explain.
(iii) Write its electronic configuration.
(iv) Name the species.
Solution:
(i) Atomic number = Number of protons = 11.
Mass number = Number of protons + Number of neutrons
= 11 + 12 = 23.
(ii) It is a cation.
This is because it has 11 positive protons but only 10 negative electrons, meaning it has lost one electron and carries a positive charge.
(iii) The electronic configuration of the species (with 10 electrons) is (2, 8).
(iv) The species is a sodium ion (Na+).
Question 13.
Two elements, A and B, have the following configurations
A: 2, 8, 5;
B: 2, 8, 7.
(i) Which element is more reactive?
(ii) Will A and B form ionic or covalent bonds when they combine? Explain using electron transfer or sharing.
(iii) Predict the formula of the compound they would form.
Solution:
(i) Element B is more reactive because it needs only 1 electron to complete its octet, whereas element A needs 3 electrons.
(ii) They will form covalent bonds. Since both are non-metals (A has 5 valence electrons and B has 7), they will achieve stability by sharing electrons rather than transferring them.
(iii) The formula of compound AB3

Formula: AB3
Element A (2,8, 5) has 5 valence electrons and needs 3 more to complete its octet, giving it a valency of 3. Element B (2, 8, 7) has 7 valence electrons and needs 1 more, giving it a valency of 1. By criss-crossing their valencies, we arrive at the formula AB3.
Question 14.
Assertion (A): Copper sulphate conducts electricity in the molten state but not in the solid state.
Reason (R): Copper and sulphate ions are fixed in the lattice in the molten state, while in the solid state they can move freely.
Choose the correct option.
(i) Both A and R are true, and R is the correct explanation of A.
(ii) Both A and R are true, but R is not the correct explanation of A
(iii) A is true, but R is false.
(iv) A is false, but R is true,
Solution:
(iii) A is true, but R is false.
The Assertion is true because ionic compounds like copper sulphate need free ions to conduct electricity, which only happens in molten or dissolved states.
However, the Reason is false because ions are fixed in the solid state and become free to move in the molten state (the reason states the opposite).
Question 15.
The species 27Al, 80Br– and 201Hg2+ have 13, 35 and 80 protons, respectively. How many electrons and neutrons do they have?
Solution:
For 27Al (Aluminium atom):
- Electrons = 13 (In a neutral atom, electrons = protons).
- Neutrons = Mass number – Protons
= 12 – 13 = 14 neutrons.
For 80Br–(Bromide ion):
- Electrons = 35 + 1 = 36 electrons (Negative charge means it gained 1 electron).
- Neutrons = Mass number – Protons = 80 – 35 = 45 neutrons.
For 201Hg2+ (Mercuric ion):
- Electrons = 80 – 2 = 78 electrons (2 + charge means it lost 2 electrons).
- Neutrons = Mass number – Protons = 201 – 80 = 121 neutrons.
Class 9 Science Chapter 9 Atomic Foundations of Matter Question Answer (InText)
Question 1.
A student burns 10 g of ethanol in an open beaker. After the reaction, no residue is left. Does this mean the law of conservation of mass is violated? Explain.
Solution:
No, the law is not violated. The ethanol reacts with oxygen from the air to form gaseous products like carbon dioxide and water vapour. Since the beaker is open, these gases escape into the atmosphere. If the reaction were carried out in a closed container, the total mass of the products would be exactly equal to the total mass of the reactants.
Question 2.
When 20 g of hydrogen reacts completely with 160 g of oxygen, how much water is formed according to the law of conservation of mass?
Solution:
According to the Law of Conservation of Mass, the total mass of reactants is equal to the total mass of products.
Mass of hydrogen = 20 g
Mass of oxygen = 160 g
Total mass of reactants = 20g + 160 g = 180 g
Therefore, the mass of water formed = 180 g.
Question 3.
A compound consists of 40 % sulphur and 60 % oxygen by mass. In a sample of the same compound containing 20 g of sulphur, what mass of oxygen must be present to satisfy the Law of Constant Proportions?
Solution:
According to the law of constant proportions, the elements in a chemical compound are always present in definite proportions by mass.
Mass percentage of sulphur = 40 %
Mass percentage of oxygen = 60 %
Ratio of sulphur to oxygen = 40 : 60 or 2 : 3
In a 20 g sample of sulphur, let the mass of oxygen be x.
\(\frac{\text { Mass of sulphur }}{\text { Mass of oxygen }}=\frac{2}{3}\)
\(\frac{20 g}{x}=\frac{2}{3}\)
x = \(\frac{20 \times 3}{2}\) = 30g
So, 30 g of oxygen must be present.
![]()
Question 4.
Carbon monoxide (CO) contains carbon and oxygen in the mass ratio of 3 : 4. How much oxygen will combine with 9 g of carbon to form carbon monoxide?
Solution:
The mass ratio of carbon to oxygen in carbon monoxide is 3:4.
This means 3 g of carbon combines with 4 g of oxygen.
For 9 g of carbon:
Oxygen = \(\frac{4}{3} \times 9\) = 12 g.
Therefore, 12 g of oxygen will combine with 9 g of carbon to form carbon monoxide.
Question 5.
The Law of Definite Proportions holds for compounds but not for mixtures. Give reason.
Solution:
This is because a compound is a pure substance where elements are chemically combined in a fixed, definite proportion by mass. On the other hand, a mixture is formed by simply mixing substances together physically without any chemical bond, so its components can be present in any ratio or proportion.
Question 6.
Students X and Y, both prepared an oxide of copper by combining copper and oxygen in the ratios of 4 : 1 and 8 : 2, respectively. Do their results justify the law of constant proportions? Explain.
Solution:
Yes, their results justify the Law of Constant proportions.
Student X’s ratio of copper to oxygen = 4 : 1
Student Y’s ratio of copper to oxygen = 8 : 2
When we simplify student Y’s ratio \(\frac{8}{2}=\frac{4}{1}\)
Since, both students obtained the same simplified ratio (4 : 1), it proves that the elements in the copper oxide are always combined in the same fixed proportion by mass, regardless of the method of preparation.
![]()
Question 7.
Assertion (A): 2 g of hydrogen combines with 16 g of oxygen to form 18 g of water.
Reason (R): According to Dalton’s atomic theory, atoms combine in a simple whole number ratio by mass to form compound.
Choose the correct option.
(i) Both A and R are true and R is the correct explanation of A.
(ii) Both A and R are true but R is not the correct explanation of A.
(iii) A is true, but R is false.
(iv) A is false, but R is true.
Solution:
(i) Both A and R are true, and R is the correct explanation of A.
The Assertion is true as it follows the law of constant proportions (2 : 16 simplifies to 1 : 8). The Reason is true because Dalton’s theory states that atoms combine in simple whole number ratios to form compounds, which explains why the mass ratio in water is always fixed.
Question 8.
Nitrogen has five valence electrons. Draw the structure of the nitrogen molecule (N2).
Solution:
Each nitrogen atom has 5 valence electrons and needs 3 more to complete its octet. Therefore, two nitrogen atoms share three pairs of electrons to form a triple covalent bond.

Question 9.
The atomic number of fluorine is 9. Explain the formation of the fluorine molecule (F2).
Solution:
Fluorine has an atomic number of 9, so its electronic configuration is (2, 7). It has 7 valence electrons and needs 1 more to become stable. To achieve this, two fluorine atoms share one pair of electrons, forming a single covalent bond to create an F2 molecule.

![]()
Question 10.
Show the formation of the following molecules
(i) Carbon dioxide (CO2)
(ii) Hydrogen sulphide (H2S)
(iii) Ammonia (NH3)
Solution:
(i) Carbon dioxide (CO2):
Carbon has 4 valence electrons, and oxygen has 6. To complete their octets, one carbon atom shares two pairs of electrons with each of the two oxygen atoms, forming two double covalent bonds (O = C = O).

(ii) Hydrogen sulphide (H2S):
Sulphur has 6 valence electrons and hydrogen has 1. One sulphur atom shares one electron with each of the two hydrogen atoms to form two single covalent bonds (H—S—H).

(iii) Ammonia (NH3):
Nitrogen has 5 valence electrons and needs 3 more. It shares one electron each with three hydrogen atoms, resulting in the formation of three single covalent bonds.

Question 11.
Neon (atomic number 10) neither transfers nor shares its valence electrons. Explain.
Solution:
Neon has an atomic number of 10, giving it an electronic configuration of (2, 8). Because its outermost shell is completely filled with 8 electrons, it is already stable. Since it has a complete octet, it has no tendency to lose, gain, or share electrons with other atoms.
Question 12.
What kind of ion will oxygen (O) form?
Solution:
Oxygen has 6 valence electrons and needs 2 more to complete its octet. Therefore, it gains 2 electrons to form a negatively charged ion called an anion, specifically an oxide ion (O2-).
![]()
Question 13.
Fill in the blanks.
Among magnesium and chlorine, magnesium atom can give two electrons to become Mg2+. However, chlorine can take only one electron to become ___________. Now, ___________ ion of magnesium and ___________ ions of chlorine combine to give magnesium chloride.
Solution:
Among magnesium and chlorine, magnesium atom can give two electrons to become Mg2+. However, chlorine can take only one electron to become Cl–. Now, one ion of magnesium and two ions of chlorine combine to give magnesium chloride.
Question 14.
Show the formation of cations of potassium (K) and calcium (Ca) atoms, and the formation of their corresponding chlorides using diagrams.
Solution:
Formation of Cations:
1. Potassium (K): K (2, 8, 8, 1) loses 1 electron → K+ (2, 8, 8) + e–

2. Calcium (Ca): Ca (2, 8, 8, 2) loses 2 electrons → Ca2+ (2, 8, 8) + 2e–

Formation of Chlorides:
Potassium Chloride (KCl): One K atom transfers 1 electron to one Cl atom.
![]()
Calcium chloride (CaCl2): One Ca atom transfers 1 electron each to two separate Cl atoms.

Question 15.
Illustrate how sodium sulphide (Na2S) is formed.
Solution:
Sodium (Na) has 1 valence electron, and Sulphur (S) has 6 valence electrons. To achieve stability, two sodium atoms each lose one electron to form two Na+ ions. One sulphur atom gains these two electrons to form one S2- ion. The electrostatic attraction between these oppositely charged ions results in the formation of sodium sulphide (Na2S).

![]()
Question 16.
Name the following.
(i) CO2
(ii) NO2
(iii) SF6
(iv) PCl3
Solution:
(i) Carbon dioxide
(ii) Nitrogen dioxide
(iii) Sulphur hexafluoride
(iv) Phosphorus trichloride
Question 17.
Write the formula for the following.
(i) Sodium hydrogencarbonate
(ii) Sulphur dioxide
(iii) Ferric chloride
(iv) Cuprous oxide
Solution:
(i) Sodium hydrogencarbonate: The formula of sodium hydrogencarbonate

Thus, in sodium hydrogencarbonate, the positive sodium ion (Na+) and the negative polyatomic hydrogencarbonate ion (\(HC \mathrm{O}_3^{-}\)) have equal and opposite charges. The charges balance each other to form a neutral structure.
(ii) Sulphurdioxide: The formula of sulphur dioxide

Formula SO2
Here, the valencies of the two elements are 4 and 2. Crossing them gives the ratio 2 : 4, which simplifies to 1 : 2. We arrive at the formula S2O4, but it is simply written using the lowest common ratio as SO2.
(iii) Ferric chloride: The formula of ferric chloride

Formula: FeCl3
Iron (Fe) can exhibit a valency of 2 or 3. The ‘ic’ suffix in the word ferric indicates that it uses the higher valency of 3.
(iv) Cuprous oxide: The formula of cuprous oxide

Formula: Cu2O
Copper (Cu) can exhibit a valency of 1 or 2. The ‘ous’ suffix in the word cuprous indicates that it uses the lower valency of 1.
![]()
Question 18.
Write the formulae for the compounds formed from the following pairs of ions.
(i) Fe3+ and OH–
(ii) K+ and \(C \mathrm{O}_3^{2-}\)
Solution:
(i) Fe3+ and OH–
The formula of iron (III) hydroxide

Formula: Fe(OH)3
The iron (III) ion (Fe3+) has a valency of 3, while the hydroxide ion (OH–) has a valency of 1. Brackets enclose the polyatomic hydroxide ion.
(ii) K+ and \(C \mathrm{O}_3^{2 -}\)
The formula of potassium carbonate

Formula: K2CO3
The potassium ion (K+) has a valency of 1, and the carbonate ion (\(C \mathrm{O}_3^{2 -}\)) has a valency of 2.
Question 19.
What type of chemical bond is present in a solid compound that does not conduct electricity in the solid state but conducts electricity when dissolved in water?
Solution:
The compound contains an ionic bond. In the solid state, the ions are held in fixed positions by strong forces and cannot move. When dissolved in water, these ions become free to move and can carry an electric current.
Question 20.
Metal M, with two electrons in its valence shell (M shell), reacts with oxygen to form a compound that is slightly soluble in water. Predict its.
(i) formula
(ii) type of bond
(iii) electrical conductivity of its aqueous solution.
Solution:
Metal M has 2 valence electrons, so its valency is 2 +.
Oxygen has 6 valence electrons and needs 2 more, so its valency is 2 -.
(i) Formula: MO (Since both have a valency of 2, they combine in a 1 : 1 ratio).
(ii) Type of bond: Ionic bond (formed by the transfer of electrons from metal M to oxygen).
(iii) Electrical conductivity: The aqueous solution will conduct electricity because the compound releases free ions when dissolved in water.
![]()
Question 21.
Find the molecular mass of nitric acid (HNO3).
Atomic mass — H = 1 u; N = 14 u; O = 16 u.
Solution:
Nitric acid (HNO3)
Molecular mass = (1 × mass of H) + (1 × mass of N) + (3 × mass of O)
=(1 × 1 u) + (1 × 14u) + (3 × 16u)
= 1 u + 14 u + 48 u
= 63 u
Question 22.
Find the molecular mass of methane (CH4).
Atomic mass — C = 12 u; H = 1 u.
Solution:
Molecular mass of methane (CH4)
Atomic mass — C = 12 u; H = 1 u
Molecular mass of CH4 = (12 u × 1) + (1 u × 4) = 16 u.
Question 23.
Find the formula unit mass of potassium chloride (KCl).
Atomic mass — K = 39 u; Cl = 35.5 u.
Solution:
Formula unit mass of potassium chloride (KCl)
Atomic mass — K = 39 u; Cl = 35.5 u
Formula unit mass of KCl = (39 u × 1) + (35.5 u × 1) = 74.5 u.
Question 24.
Find the formula unit mass of magnesium hydroxide, Mg(OH)2.
Atomic mass — Mg = 24 u; O = 16 u; H = 1 u.
Solution:
Formula unit mass of Mg(OH)2
= (1 × mass of Mg) + (2 × mass of O) + (2 × mass of H)
= (1 × 24u) + (2 × 16u) + (2 × 1 u)
= 24 u + 32 u + 2 u = 58 u
![]()
Class 9 Science Chapter 9 Question Answer (Activities)
Activity 1: Let Us Investigate a Physical Change
Objective: To verify that there is no change in mass during a physical change (dissolution of salt in water).
Materials Required:
- 100 mL beaker (clean and dry)
- Digital weighing balance
- Water (about 50 mL)
- Common salt
- Spatula
Procedure:
- Place a clean and dry 100 mL beaker on a digital weighing balance.
- Set the balance reading to zero using the tare/reset button.
- Pour about 50 mL of water into the beaker.
- Add a spatula full of common salt to the water.
- Record the mass shown on the weighing balance.
- Stir or swirl the mixture until the salt dissolves completely.
- Record the mass again after complete dissolution.

Observation:
- The salt dissolves completely in water, forming a solution.
- The mass of the solution remains equal to the total mass of salt and water taken initially.
Conclusion:
- There is no change in mass during the formation of a solution.
- This shows that dissolution of salt in water is a physical change.
- In physical changes, mass is conserved.
Viva Voce Questions
Question 1.
What is a physical change?
Question 2.
Why does the mass remain unchanged after dissolving salt in water?
Question 3.
What is meant by conservation of mass?
Question 4.
Is dissolving sugar in water also a physical change? Why?
Question 5.
Can a physical change be reversed? Give an example.
![]()
Activity 2: Let Us Investigate a Chemical Change
Objective: To study whether mass changes during a chemical reaction and understand the concept of conservation of mass.
Materials Required:
- Conical flask (100 mL)
- Balloon
- Digital weighing balance
- Vinegar (or lemon juice) (~20 mL)
- Baking soda (sodium hydrogen carbonate) (~2 g)
Procedure:
- Place a clean, dry conical flask and a balloon on a digital weighing balance.
- Set the balance reading to zero using the tare/reset button.
- Pour about 20 mL of vinegar into the conical flask.
- Take about 2 g of baking soda and put it inside the balloon.
- Fix the balloon on the mouth of the conical flask carefully without spilling the baking soda.
- Place the setup on the weighing balance and record the initial reading.
- Now gently lift the balloon so that the baking soda falls into the flask and reacts with vinegar.
- Observe the reaction (effervescence due to gas formation).
- Place the setup again on the weighing balance and record the final reading.


Observation:
- A brisk effervescence is observed due to the release of carbon dioxide gas.
- The balloon inflates as gas is produced.
- The initial and final mass readings remain nearly the same when the system is closed.
Conclusion:
- The reaction between vinegar and baking soda is a chemical change.
- Carbon dioxide gas is formed during the reaction.
- When the system is closed (using a balloon), mass remains conserved.
- This verifies the law of conservation of mass, even in chemical changes.
Viva Voce Questions
Question 1.
What type of change occurs when vinegar reacts with baking soda?
Question 2.
Which gas is produced during this reaction?
Question 3.
Why does the balloon inflate during the experiment?
Question 4.
What is meant by the law of conservation of mass?
Question 5.
Why must the system be closed to observe conservation of mass?
![]()
Activity 3: Let Us Verify the Law – Group Activity
Objective: To verify the law of conservation of mass during a chemical reaction.
Materials Required:
- Two conical flasks (100 mL) labeled A and B.
- Digital weighing balance
- Sodium sulphate solution (1% m/v) (~10 mL)
- Barium chloride solution (1% m/v) (~10 mL)
- Marker/label
Procedure:
- Take two clean and dry conical flasks and label them A and B.
- Place both flasks on a digital weighing balance and set the reading to zero using the tare/reset button.
- Pour about 10 mL of sodium sulphate solution into flask A.
- Pour about 10 mL of barium chloride solution into flask B.
- Keep both flasks on the weighing balance and record the total initial mass.
- Transfer the solution from flask B into flask A and mix them carefully.
- Observe the reaction taking place.
- Place the flasks again on the weighing balance and record the final mass.
- Compare the initial and final readings.

Observation:
- A white precipitate is formed when the two solutions are mixed.
- This precipitate is barium sulphate.
- The initial and final mass remain the same.
Chemical Reaction:
Sodium sulphate + Barium chloride → Barium sulphate + Sodium chloride
Conclusion:
- A chemical reaction occurs, forming a new substance (white precipitate).
- Despite the chemical change, mass remains conserved.
- This verifies the law of conservation of mass, which states that mass is neither created nor destroyed during a chemical reaction.
![]()
Activity 4: Let Us Experiment
Objective: To compare the properties of ionic and covalent compounds based on their solubility and electrical conductivity.
Materials Required:
- Samples of compounds: Camphor, Sodium chloride, Copper sulphate, Sugar, Naphthalene
- Beakers
- Water
- Kerosene
- Petrol
- Carbon/metal electrodes
- Battery (low voltage, e.g., 9V)
- Bulb
- Connecting wires
- Cardboard
Procedure:
(A) Solubility Test:
- Take small amounts of each compound in separate test tubes/beakers.
- Add water to each sample and observe whether it dissolves.
- Repeat the same process using kerosene and petrol as solvents.
- Record the solubility of each compound in all three solvents.

(B) Electrical Conductivity Test:
- Set up the electrical circuit using a battery, bulb, and electrodes.
- Test each compound in solid state by placing it between electrodes and observe whether the bulb glows.
- Dissolve each compound in water separately.
- Test the electrical conductivity of each solution using the same setup.
- Record whether the bulb glows or not in each case.
Observation (Summary Table):
| Compound | Soluble in Water | Soluble in Kerosene/Petrol | Conductivity (Solid) | Conductivity (in Water) |
| Camphor | No | Yes | No | No |
| Sodium chloride | Yes | No | No | Yes |
| Copper sulphate | Yes | No | No | Yes |
| Sugar | Yes | No | No | No |
| Naphthalene | No | Yes | No | No |
Conclusion:
1. Ionic compounds (e.g. sodium chloride, copper sulphate):
- Soluble in water
- Insoluble in kerosene/petrol
- Conduct electricity in aqueous solution but not in solid state
2. Covalent compounds (e.g., camphor, naphthalene, sugar)
- Usually insoluble in water (except sugar)
- Soluble in organic solvents (kerosene/petrol)
- Do not conduct electricity
3. Ionic compounds have high melting and boiling points, while covalent compounds generally have low melting and boiling points.
![]()
Viva Voce Questions:
Question 1.
What is the main difference between ionic and covalent compounds?
Question 2.
Why do ionic compounds conduct electricity in solution but not in solid state?
Question 3.
Why are covalent compounds generally insoluble in water?
Question 4.
Why does sugar not conduct electricity even when dissolved in water?
Question 5.
Which type of compound has a higher melting point, and why?